1

00:00:03,100 --> 00:00:04,866

The line is now connected

2

00:00:07,433 --> 00:00:09,466

Next we start to fix this line

3

00:00:10,666 --> 00:00:15,900

If it is not fixed, it may be easy to loosen when the high temperature blows these positions

4

00:00:18,466 --> 00:00:21,466

So we're going to put a little green oil on it to fix it

5

00:00:26,300 --> 00:00:28,333

The copper wire must be insulated

6

00:00:29,266 --> 00:00:30,600

If it is not insulated

7

00:00:31,066 --> 00:00:34,033

It will definitely be shorted next to the capacitor like this

8

00:00:41,166 --> 00:00:43,600

Due to the large area applied with green oil

9

00:00:45,066 --> 00:00:46,933

Let's move the curing light a little bit

10

00:00:48,366 --> 00:00:53,433

Prevent some positions from being blocked by components and the light is not irradiated

11

00:00:53,666 --> 00:00:55,966

This green oil is not fully hardened

12

00:01:01,733 --> 00:01:03,600

Now we can try it out with tweezers

13

00:01:04,066 --> 00:01:06,066

See if these green oils are adhered

14

00:01:06,500 --> 00:01:11,100

If it is not firmly adhered, we will continue to cure with the curing light

15

00:01:13,900 --> 00:01:15,366

This line is adhered

16

00:01:16,933 --> 00:01:18,933

Now we have done with this copper wire