1

00:00:03,300 --> 00:00:06,200

Hello everyone, today I will show you how to fix

2

00:00:06,200 --> 00:00:10,900

the pop-up window after replacing the screen of iPhone

11 series mobile phones

3

00:00:14,800 --> 00:00:19,033

After replacing the original screen of the iPhones of 11 series,

4

00:00:19,133 --> 00:00:22,100

there will be a pop-up window at the top of the screen,

5

00:00:24,233 --> 00:00:27,766

indicating that this accessory may be a non-original accessory

6

00:00:29,400 --> 00:00:30,800

To solve this problem,

7

00:00:30,800 --> 00:00:36,100

we must remove the touch chip on the original iPhone touch cable and install it on the new screen

8

00:00:42,033 --> 00:00:44,266

The screen I'm taking now is a new one,

9

00:00:44,366 --> 00:00:47,333

we'll use it to demonstrate the operation method

10

00:01:01,200 --> 00:01:03,433

There are two kinds of screens for sales

11

00:01:03,566 --> 00:01:07,433

One has an iron sheet directly on the back, we just grind it

12

00:01:07,666 --> 00:01:09,400

This one has no iron sheet

13

00:01:09,666 --> 00:01:12,833

We need to use a soft blade to spread the flex cable

14

00:01:15,066 --> 00:01:17,500

At this time, we need to use alcohol

15

00:01:30,166 --> 00:01:32,633

Put a little alcohol on the soft blade

16

00:01:39,133 --> 00:01:42,266

Use alcohol to decompose the double-sided tape,

17

00:01:43,900 --> 00:01:47,066

and then use the blade to slowly loosen the flex cable

18

00:02:13,000 --> 00:02:15,433

Be careful not to put too much alcohol,

19

00:02:15,766 --> 00:02:18,666

because the iPhone 11 uses a backlight screen,

20

00:02:19,200 --> 00:02:22,766

If you use too much alcohol, it may seep into the backlight

21

00:02:45,000 --> 00:02:47,466

After the flex cable is unfolded,

22

00:02:47,833 --> 00:02:50,533

we find a soldered clamp and put it underneath