1

00:00:00,533 --> 00:00:02,500

iPhone camera circuit repairing

2

00:00:03,100 --> 00:00:08,166

This video mainly explains how to find the iPhone XS front camera signals and measurement points

3

00:00:10,666 --> 00:00:15,066

Search method step 1, open the iPhone XS component map,

4

00:00:16,100 --> 00:00:19,833

find the front camera connector and confirm the position number

5

00:00:21,833 --> 00:00:25,500

Step 2, search for the position number in the schematic diagram

6

00:00:27,666 --> 00:00:30,766

Step 3, after finding the camera connector,

7

00:00:31,100 --> 00:00:34,266

find the corresponding signals according to the schematic diagram

8

00:00:34,866 --> 00:00:37,766

Step 4, jump to the bitmap according to the signal,

9

00:00:37,900 --> 00:00:39,833

and find the connected components

10

00:00:41,733 --> 00:00:45,266

We can measure the voltage and diode value at the yellow points in the bitmap

11

00:00:46,666 --> 00:00:52,666

When looking up diagrams, first open the iPhone XS component map, circuit diagram, and bitmap

12

00:00:54,433 --> 00:00:58,133

Find the position number of the front camera connector in the component map

13

00:00:58,666 --> 00:01:01,866

Then search for the position number in the schematic diagram

14

00:01:05,533 --> 00:01:10,366

After finding the connector, find the corresponding signals according to the block diagram

15

00:01:12,733 --> 00:01:16,133

First find the 1.8V power supply of the front camera

16

00:01:16,333 --> 00:01:20,566

The 3rd pin of the connector is the 1.8V power supply of the front camera

17

00:01:20,966 --> 00:01:22,933

Jump to the bitmap according to the name,

18

00:01:23,833 --> 00:01:30,733

the 1.8V power supply is connected to the main power supply after passing through the fuse inductor FL4200

19

00:01:31,066 --> 00:01:35,400

The 1.8V power supply of the main power supply will also be sent to the hard disk,

20

00:01:35,400 --> 00:01:37,966

CPU and camera power at the same time

21

00:01:38,500 --> 00:01:41,866

This power supply is rarely damaged during repairs

22

00:01:42,166 --> 00:01:44,233

If the measured voltage is abnormal,

23

00:01:44,400 --> 00:01:48,633

it is most likely because the inductance FL4200 is damaged

24

00:01:50,133 --> 00:01:53,366

Let's find the I2C bus from the CPU to the front camera

25

00:01:54,966 --> 00:01:59,466

The 1st and 6th pins of the connector are the I2C buses of the front camera

26

00:02:00,733 --> 00:02:03,500

Pin 1, jump to the bitmap according to the name,

27

00:02:04,200 --> 00:02:09,066

the bus data is directly connected to the CPU, without a fuse resistor in the middle

28

00:02:09,833 --> 00:02:12,000

Pin 6, I2C bus clock

29

00:02:12,400 --> 00:02:14,133

Jump to the bitmap according to the name,

30

00:02:14,833 --> 00:02:17,766

the bus clock is also directly connected to the CPU,

31

00:02:17,966 --> 00:02:20,566

and no other components are connected in the middle

32

00:02:21,300 --> 00:02:24,466

Let's find the clock signal from the CPU to the front camera

33

00:02:25,633 --> 00:02:29,666

Pin 13 of the connector is the clock signal from the CPU to the front camera

34

00:02:30,433 --> 00:02:32,266

Jump to the bitmap according to the name,

35

00:02:33,666 --> 00:02:37,833

the clock signal is first connected to the fuse resistor R4210

36

00:02:38,766 --> 00:02:42,033

and connected to the fuse resistor R1244

37

00:02:42,500 --> 00:02:46,200

After passing through the resistor, it is connected to the CPU

38

00:02:46,666 --> 00:02:50,400

The clock signal is connected to the CPU through two fuse resistors

39

00:02:50,833 --> 00:02:55,466

Let's find the 2.85V and 1.1V power supply of the front camera

40

00:02:56,633 --> 00:03:02,466

Pins 19, 20,23, and 2 of the connector are the 1.1V power supplies

41

00:03:02,766 --> 00:03:04,600

Jump to the bitmap according to the name,

42

00:03:05,300 --> 00:03:10,633

the 1.1V power supply is directly connected to the camera power supply U3700

43

00:03:10,633 --> 00:03:14,600

after passing through the fuse inductor FL4202

44

00:03:15,733 --> 00:03:20,233

The 7th pin of the connector is the 2.85V power supply of the front camera

45

00:03:20,500 --> 00:03:22,366

Jump to the bitmap according to the name,

46

00:03:22,966 --> 00:03:28,433

the 2.85V power supply passes through the fuse inductor FL4204

47

00:03:28,666 --> 00:03:30,633

and then connects to the camera power supply

48

00:03:31,400 --> 00:03:34,666

Let's look for the open signal from the CPU to the front camera

49

00:03:35,500 --> 00:03:37,966

Pin 11 of the connector is the open signal

50

00:03:39,500 --> 00:03:41,500

Jump to the bitmap according to the name,

51

00:03:42,266 --> 00:03:46,833

the open signal is directly connected to the CPU, without fuse in the middle

52

00:03:47,333 --> 00:03:50,966

Let's find the LPDP bus from the CPU to the front camera

53

00:03:52,933 --> 00:03:58,566

For models above XR, the front camera uses the LPDP bus to transmit data

54

00:03:59,100 --> 00:04:04,533

Pins 10, 12, 16, and 18 of the connector are LPDP buses

55

00:04:06,566 --> 00:04:11,366

When the LPDP bus transmits data, it will pass through the coupling capacitor

56

00:04:11,633 --> 00:04:16,100

Pin 10, LPDP bus, jump to the bitmap according to the name,

57

00:04:16,666 --> 00:04:21,066

the pin is connected to the coupling capacitor C4231

58

00:04:21,333 --> 00:04:24,400

And connected to the CPU after passing through the capacitor

59

00:04:24,766 --> 00:04:27,933

Pin 12, jump to the bitmap according to the name,

60

00:04:28,333 --> 00:04:31,766

it is connected to the coupling capacitor C4230,

61

00:04:32,200 --> 00:04:35,666

and then connected to the CPU after passing through the capacitor

62

00:04:36,333 --> 00:04:39,833

Pin 16, jump to the bitmap according to the name,

63

00:04:40,400 --> 00:04:44,000

it is connected to the coupling capacitor C4233,

64

00:04:44,733 --> 00:04:47,833

and then connected to the CPU after passing through the capacitor

65

00:04:49,100 --> 00:04:52,533

Pin 18, jump to the bitmap according to the name,

66

00:04:53,900 --> 00:04:57,800

it is connected to the coupling capacitor C4232,

67

00:04:58,100 --> 00:05:01,233

and then connected to the CPU after passing through the capacitor

68

00:05:02,033 --> 00:05:06,500

Let's find the LPDP bus detection signal from the CPU to the front camera

69

00:05:08,566 --> 00:05:12,266

Pin 15 of the connector is the LPDP bus detection signal

70

00:05:12,766 --> 00:05:14,666

Jump to the bitmap according to the name,

71

00:05:15,666 --> 00:05:19,033

it is connected the coupling capacitor C4234,

72

00:05:19,300 --> 00:05:22,600

and connected to the CPU after passing through the capacitor

73

00:05:23,100 --> 00:05:25,300

If the front camera cannot be turned on,

74

00:05:25,533 --> 00:05:28,666

we need to measure all the working conditions of the front camera

75

00:05:29,200 --> 00:05:31,100

After measuring the abnormality,

76

00:05:31,333 --> 00:05:34,333

we can find the relevant components according to the bitmap

77

00:05:35,066 --> 00:05:36,666

That's all for this video