1

00:00:00,466 --> 00:00:02,533

iPhone audio circuit repairing

2

00:00:03,033 --> 00:00:07,033

This video mainly explains the working principle of audio power amplifier

3

00:00:07,733 --> 00:00:12,133

The working principle of iPhone 12 series audio power amplifier is the same

4

00:00:12,800 --> 00:00:17,966

Audio power amplifier refers to earpiece power amplifier and speaker power amplifier,

5

00:00:18,100 --> 00:00:20,333

which is a chip used to enhance sound

6

00:00:20,766 --> 00:00:25,433

In the iPhone, the earpiece amplifier and the speaker amplifier have the same model

7

00:00:25,566 --> 00:00:27,266

and the same working principle,

8

00:00:27,766 --> 00:00:30,100

but there are some differences in the signal

9

00:00:31,200 --> 00:00:35,566

There is a PDM bus when the signal of the earpiece power amplifier is transmitted,

10

00:00:35,966 --> 00:00:39,266

but there is no PDM bus for the speaker power amplifier

11

00:00:39,700 --> 00:00:41,866

The first step of the working principle,

12

00:00:42,066 --> 00:00:45,566

when the battery is buckled or the adjustable power supply is connected,

13

00:00:45,700 --> 00:00:47,700

the main power supply will be generated,

14

00:00:47,933 --> 00:00:52,033

and the main power supply will first provide the working voltage for the audio amplifier

15

00:00:52,333 --> 00:00:54,533

Step 2, after triggering the boot,

16

00:00:54,700 --> 00:00:57,500

the main power supply will output many power supplies,

17

00:00:57,700 --> 00:01:04,233

among which 1.2V and 1.8V power supplies will provide working voltage for the audio amplifier again

18

00:01:04,833 --> 00:01:08,500

Step 3, after the CPU working condition is normal,

19

00:01:09,100 --> 00:01:12,566

it will detect the audio power amplifier through the I2C bus

20

00:01:13,200 --> 00:01:16,433

Step 4, when starting to the audio circuit,

21

00:01:16,900 --> 00:01:20,800

the CPU will first send a clock signal to the audio power amplifier

22

00:01:21,366 --> 00:01:26,166

Step 5, the CPU sends a reset signal for the audio power amplifier

23

00:01:27,733 --> 00:01:32,700

The reset signal is sent by the power supply in some circuits, and some are sent by the CPU,

24

00:01:32,766 --> 00:01:35,666

according to the drawing identification shall prevail

25

00:01:36,500 --> 00:01:42,033

Step 6, after the audio power amplifier has the power supply, clock signal and reset signal,

26

00:01:42,233 --> 00:01:44,866

the audio power amplifier can work normally

27

00:01:45,266 --> 00:01:48,366

Step 7, when using the audio function,

28

00:01:48,766 --> 00:01:53,300

the audio chip will send audio data to the audio amplifier through the I2S bus

29

00:01:53,866 --> 00:01:59,266

Step 8, after the audio amplifier receives the audio data, it will generate a boost

30

00:02:00,400 --> 00:02:04,566

Step 9, after the boosting of the audio power amplifier is completed,

31

00:02:04,866 --> 00:02:09,800

the boosted power supply will be loaded to the output signal through the internal conversion module,

32

00:02:10,366 --> 00:02:13,400

and sent to the earpiece speaker or the bottom speaker,

33

00:02:13,833 --> 00:02:18,033

and the speaker will produce sound after it has the positive and negative signals

34

00:02:18,733 --> 00:02:24,400

When we answer the phone, the audio chip will send audio data to the handset amplifier through the PDM bus

35

00:02:26,333 --> 00:02:28,933

After receiving the PDM audio data,

36

00:02:29,133 --> 00:02:32,400

the earpiece power amplifier will not boost the voltage,

37

00:02:32,833 --> 00:02:36,500

and directly output to the earpiece speaker through the output pin

38

00:02:36,900 --> 00:02:41,633

Because there is no boost, the sound from the earpiece speaker is relatively small

39

00:02:42,266 --> 00:02:45,300

When there is no earpiece or no sound from the speaker,

40

00:02:45,500 --> 00:02:48,566

we need to check the working conditions of the audio amplifier

41

00:02:49,000 --> 00:02:53,266

If there is an abnormality in the working condition of the audio power amplifier,

42

00:02:53,633 --> 00:02:55,466

it will cause no sound failure

43

00:02:55,833 --> 00:02:57,533

That's all for this video