1

00:00:00,333 --> 00:00:02,333

iPhone camera circuit repairing

2

00:00:03,066 --> 00:00:08,233

This video mainly explains how to find the iPhone XR front camera signals and measurement points

3

00:00:11,266 --> 00:00:15,033

Search method step 1, open the iPhone XR component map,

4

00:00:16,533 --> 00:00:20,066

find the front camera connector and confirm the position number

5

00:00:22,766 --> 00:00:26,633

Step 2, search for the position number in the schematic diagram

6

00:00:28,566 --> 00:00:31,800

Step 3, after finding the camera connector,

7

00:00:32,000 --> 00:00:35,433

find the corresponding signals according to the schematic diagram

8

00:00:37,000 --> 00:00:40,200

Step 4, jump to the bitmap according to the name,

9

00:00:40,533 --> 00:00:42,633

and find the connected components

10

00:00:44,266 --> 00:00:47,966

We can measure the voltage and diode value at the yellow points in the bitmap

11

00:00:50,900 --> 00:00:56,166

When checking the diagrams, first open the iPhone XR component map, circuit diagram, and bitmap

12

00:00:58,600 --> 00:01:02,433

Find the position number of the front camera connector in the component map

13

00:01:02,966 --> 00:01:06,333

Then search for the position number in the schematic diagram

14

00:01:08,233 --> 00:01:13,133

After finding the connector, find the corresponding signals according to the block diagram

15

00:01:15,666 --> 00:01:19,333

First find the 1.8V power supply of the front camera

16

00:01:19,800 --> 00:01:24,166

The 3rd pin of the connector is the 1.8V power supply of the front camera

17

00:01:26,166 --> 00:01:28,200

Jump to the bitmap according to the name,

18

00:01:30,300 --> 00:01:37,300

the 1.8V power supply is connected to the main power supply after passing through the fuse inductor FL4200

19

00:01:39,933 --> 00:01:44,200

The 1.8V power supply of the main power supply will also be sent to the hard disk,

20

00:01:44,200 --> 00:01:46,700

CPU and camera power at the same time

21

00:01:47,033 --> 00:01:50,066

This power supply is rarely damaged during repairs

22

00:01:50,433 --> 00:01:52,566

If the measured voltage is abnormal,

23

00:01:52,666 --> 00:01:57,000

it is most likely because the inductance FL4200 is damaged

24

00:01:58,333 --> 00:02:01,866

Let's find the I2C bus from the CPU to the front camera

25

00:02:02,866 --> 00:02:07,266

The 1st and 6th pins of the connector are the I2C buses of the front camera

26

00:02:08,066 --> 00:02:10,933

Pin 1, jump to the bitmap according to the name,

27

00:02:11,400 --> 00:02:16,233

the bus data is directly connected to the CPU, without a fuse resistor in the middle

28

00:02:16,666 --> 00:02:18,933

Pin 6, I2C bus clock

29

00:02:19,400 --> 00:02:21,333

Jump to the bitmap according to the name,

30

00:02:21,466 --> 00:02:27,466

the bus clock is also directly connected to the CPU,

31

00:02:27,833 --> 00:02:31,133

Let's find the clock signal from the CPU to the front camera

32

00:02:31,766 --> 00:02:35,700

Pin 13 of the connector is the clock signal from the CPU to the front camera

33

00:02:36,600 --> 00:02:38,466

Jump to the bitmap according to the name,

34

00:02:38,866 --> 00:02:43,300

the clock signal is first connected to the fuse resistor R4210

35

00:02:43,766 --> 00:02:46,900

and connected to the fuse resistor R1201

36

00:02:48,733 --> 00:02:52,366

After passing through the resistor, it is connected to the CPU

37

00:02:52,866 --> 00:02:56,866

The clock signal is connected to the CPU through two fuse resistors

38

00:02:57,200 --> 00:03:02,000

Let's find the 2.85V and 1.1V power supply of the front camera

39

00:03:04,566 --> 00:03:10,700

Pins 19, 20,23, and 2 of the connector are the 1.1V power supplies

40

00:03:11,633 --> 00:03:13,700

Jump to the bitmap according to the name,

41

00:03:14,133 --> 00:03:19,466

the 1.1V power supply is directly connected to the camera power supply U3700

42

00:03:19,500 --> 00:03:23,133

after passing through the fuse inductor FL4202

43

00:03:23,900 --> 00:03:28,500

The 7th pin of the connector is the 2.85V power supply of the front camera

44

00:03:28,600 --> 00:03:30,633

Jump to the bitmap according to the name,

45

00:03:31,066 --> 00:03:36,766

the 2.85V power supply passes through the fuse inductor FL4204

46

00:03:36,766 --> 00:03:38,966

and then connects to the camera power supply

47

00:03:39,500 --> 00:03:42,933

Let's look for the open signal from the CPU to the front camera

48

00:03:43,633 --> 00:03:46,266

Pin 11 of the connector is the open signal

49

00:03:46,866 --> 00:03:48,833

Jump to the bitmap according to the name,

50

00:03:49,366 --> 00:03:54,000

the open signal is directly connected to the CPU, without fuse in the middle

51

00:03:54,400 --> 00:03:58,166

Let's find the LPDP bus from the CPU to the front camera

52

00:03:58,833 --> 00:04:04,566

Pins 10, 12, 16, and 18 of the connector are LPDP buses

53

00:04:06,166 --> 00:04:10,866

Pin 10, LPDP bus, jump to the bitmap according to the name,

54

00:04:11,333 --> 00:04:14,933

it is connected to the coupling capacitor C4230,

55

00:04:15,233 --> 00:04:18,633

And connected to the CPU after passing through the capacitor

56

00:04:18,733 --> 00:04:21,933

Pin 12, jump to the bitmap according to the name,

57

00:04:22,533 --> 00:04:26,466

the pin is connected to the coupling capacitor C4231

58

00:04:26,933 --> 00:04:30,133

and then connected to the CPU after passing through the capacitor

59

00:04:31,000 --> 00:04:34,600

Pin 16, jump to the bitmap according to the name,

60

00:04:35,233 --> 00:04:39,066

it is connected to the coupling capacitor C4232,

61

00:04:39,333 --> 00:04:42,633

and then connected to the CPU after passing through the capacitor

62

00:04:43,533 --> 00:04:47,166

Pin 18, jump to the bitmap according to the name,

63

00:04:47,933 --> 00:04:51,733

it is connected to the coupling capacitor C4233,

64

00:04:52,166 --> 00:04:55,500

and then connected to the CPU after passing through the capacitor

65

00:04:56,300 --> 00:05:01,233

Let's find the LPDP bus detection signal from the CPU to the front camera

66

00:05:02,833 --> 00:05:07,100

Pin 15 of the connector is the LPDP bus detection signal

67

00:05:07,566 --> 00:05:09,700

Jump to the bitmap according to the name,

68

00:05:10,333 --> 00:05:13,866

it is connected the coupling capacitor C4234,

69

00:05:14,233 --> 00:05:17,633

and connected to the CPU after passing through the capacitor

70

00:05:18,066 --> 00:05:22,733

Coupling capacitors are connected in the LPDP bus from the front camera to the CPU

71

00:05:24,500 --> 00:05:27,433

If one of the coupling capacitors is damaged or removed,

72

00:05:27,633 --> 00:05:29,433

the front camera cannot be used

73

00:05:30,200 --> 00:05:32,466

That's all for this video