• Learning center

233. Reasons for the earpiece no sound fault
233. Reasons for the earpiece no sound fault
Detail
Comments

1

00:00:01,033 --> 00:00:06,433

This lesson talks about the related circuits and related components of the earpiece

2

00:00:06,933 --> 00:00:09,666

First look at the position of the earpiece

3

00:00:10,233 --> 00:00:13,700

The earpiece is located on the top of the phone

4

00:00:14,933 --> 00:00:19,166

The picture on the right is a disassembled Huawei mobile phone

5

00:00:19,866 --> 00:00:21,666

Its earpiece is here

6

00:00:25,100 --> 00:00:29,366

This is another model, it also has the earpiece on the top

7

00:00:32,700 --> 00:00:35,600

The design should conform to ergonomics.

8

00:00:36,200 --> 00:00:39,700

When we make a phone call, we use our ears to hear the sound,

9

00:00:40,066 --> 00:00:42,633

so the ear should be close to the receiver

10

00:00:44,966 --> 00:00:51,533

It is necessary for us to understand the connection between the earpiece and the mainboard in the mobile phone

11

00:00:52,200 --> 00:00:58,966

The first type, such as the Huawei P40 model in the picture, its earpiece is close to the direction of the screen

12

00:01:01,266 --> 00:01:04,666

The screen is covered and its contacts are below

13

00:01:05,366 --> 00:01:12,200

The two contacts of the earpiece are the earpiece signal, which comes from a large audio or small audio amplifier

14

00:01:13,200 --> 00:01:17,400

The signal that drives it touches the position of the earpiece through the contacts

15

00:01:17,400 --> 00:01:19,733

to drive the earpiece to make a sound

16

00:01:21,366 --> 00:01:24,000

This is connected by shrapnel

17

00:01:25,900 --> 00:01:32,200

There is another way to connect the earpiece, which is connected by the cover plate that fixes the mainboard

18

00:01:33,733 --> 00:01:40,700

For example, like this, the shrapnel of the earpiece is suspended here, and the mainboard has been put down

19

00:01:41,100 --> 00:01:44,000

The shrapnel on the mainboard are these two

20

00:01:44,800 --> 00:01:50,200

If it wants to transmit this signal, it must rely on the cover plate that fixes the mainboard,

21

00:01:50,200 --> 00:01:54,266

and the coating on the cover plate transmits the signal of the earpiece

22

00:01:55,100 --> 00:01:56,733

It looks like this

23

00:01:58,066 --> 00:02:01,333

This contact point is connected to this position

24

00:02:01,700 --> 00:02:04,666

This is a cover for fixing the mainboard

25

00:02:05,433 --> 00:02:07,900

This white is the conductive layer

26

00:02:08,600 --> 00:02:12,233

It hits here, this wide spot hits these two shrapnel

27

00:02:12,900 --> 00:02:18,200

In this way, the earpiece signal can be transmitted from the mainboard to the earpiece.

28

00:02:18,966 --> 00:02:24,566

This is the connection between the earpiece and the mainboard, and there are two types of common

29

00:02:25,200 --> 00:02:28,066

The reason why there is no sound from the earpiece

30

00:02:28,400 --> 00:02:33,033

Generally speaking, is that there is a problem with the large audio frequency

31

00:02:33,633 --> 00:02:38,933

It is impossible to send the voice signal of the other party to the earpiece when making a call,

32

00:02:38,933 --> 00:02:41,666

so as to restore the voice of the other party

33

00:02:43,600 --> 00:02:48,366

First, a problem with the large audio will cause the earpiece to be silent

34

00:02:49,200 --> 00:02:54,966

Second, a problem with the channel sent to the earpiece will also cause no sound from the earpiece

35

00:02:55,466 --> 00:02:59,966

Third, if there is a problem with the earpiece, it will also cause no sound

36

00:03:00,566 --> 00:03:03,900

In fact, three aspects are emphasized here

37

00:03:04,566 --> 00:03:07,966

It's a normal earpiece, it's powered by big audio

38

00:03:08,833 --> 00:03:12,233

Now some earpieces are driven by small audio

39

00:03:14,300 --> 00:03:20,133

It is necessary to replace the large audio with a small audio, and the others are the same

40

00:03:22,100 --> 00:03:26,933

It should be noted here, what does it mean that the earpiece is driven by small audio,

41

00:03:26,933 --> 00:03:31,500

that is, the earpiece can play music, this is stereo or double speakers

42

00:03:32,166 --> 00:03:35,266

Many phones now support stereo sound

43

00:03:36,066 --> 00:03:37,933

That's all for this lesson

No comments yet
Come and write your comments
Links: